INSTALL TRACCAR WEB INTERFACE UBUNTU INSTALL
INSTALL TRACCAR WEB INTERFACE UBUNTU ANDROID
INSTALL TRACCAR WEB INTERFACE UBUNTU SOFTWARE
INSTALL TRACCAR WEB INTERFACE UBUNTU PASSWORD
INSTALL TRACCAR WEB INTERFACE UBUNTU PC

INSTALL TRACCAR WEB INTERFACE UBUNTU PASSWORD

You should be greeted with a web interface, the default username and password is admin. When finished open a browser on the same network and try to connect to server using the ip address and port 8082.

INSTALL TRACCAR WEB INTERFACE UBUNTU INSTALL

Next all of the commands needed to install the server are described below: sudo mkdir /opt/traccar & cd /opt/traccar sudo wget Grab the download link, connect to the raspberry pi using your favorite method, I used SSH on the local network. We’re going to be using the linux arm release, because the raspberry pi runs on an arm processor.

INSTALL TRACCAR WEB INTERFACE UBUNTU SOFTWARE

Next step is to setup the tracking server, the name of the software is Traccar and here is their website. Relay GPS Tracker (2G only): Link1, Link2, Link3, Link4. Traccar is an open source GPS Tracking platform which can locate any number and type of devices.

The linux installed on the RPI is Ubuntu Desktop 20.10 64b I have tried with the downloads traccar-linux-arm-4.12 and. I have a Raspberry Pi 4, 8Gb with a 32 Gb sd card. Up till inclusive the above step 8 all works well.

INSTALL TRACCAR WEB INTERFACE UBUNTU PC

Raspberry Pi 4 Model B: Link1, Link2, Link3, Link4. However considering the power consumption of my old PC I have bought a Raspberry Pi 4 and installed Linux and traccar on it.

But cant access without the port, it says site cant be reached. If you live in a country where 2G networks have been decommission you will need to buy a 3G enabled GPS tracker, they are more expensive and the instructions provided here for configuring the tracker, might not be 100% compatible with a 3G enabled GPS tracker. I followed the instruction to install traccar on Ubuntu. Pick your favorite local operator for this but keep in mind this particular GPS model only works on 2G networks. For the GPRS connection between the GPS tracker and the server you will need to provide a data enabled sim card. This is a brilliant idea because if you hide this under the dashboard, nobody will suspect what the real function is. I've used a model which is disguised as an automotive relay. If there are HEX messages in the log, go to point 2. If server receives any data from device (even if the port is wrong), you should be able to see HEX messages in the log. On Windows its usually in C:Program FilesTraccarlogs'. For reference I used a raspberry pi 4 and while you might already have this I will still place some links below to places where you can get a raspberry pi 4.Īlso very important is the GPS tracker. Check tracking server logs: On Linux and Mac it should be in /opt/traccar/logs. The instructions below assume traccar is running on the same host as the mysql server.At the core of this project lies the raspberry pi, any model should work, but if you use one of the latest models you should get better performance, meaning software will run smoother and it will be faster to install. Make sure the specified database and mysql user exist with adequate permissions. More config options are detailed at /configuration-file/Įnsure the database server is reachable. conf/default.xml jdbc:mysql://localhost:3306/traccar?allowMultiQueries=true &autoReconnect=true &useUnicode=yes &characterEncoding=UTF-8 &sessionVariables=sql_mode=ANSI_QUOTES &useSSL=false traccar password false true true true true 180 30 false 560 Lowering the socket timeout should also help mitigate the effects of intermittent device connectivity. If the device explicitly closes the connection, the marker will also turn red. After 1 minute with no contact, the connection is closed and its marker turns red. I like devices to promptly show as offline: If no message is received from a particular device for 30 seconds, that devices marker turns orange. All trackers I'm using are configured to send at 10 second intervals. I set short status timeout and port timeouts. You can whittle these down later, once you have established those that you do need. If you are not sure which protocol your device uses or which port it attempts to connect to, leave all the ports enabled in default.xml.

INSTALL TRACCAR WEB INTERFACE UBUNTU ANDROID

In my case, h02 (for the dog trackers) and osmand (for the android traccar client app). Then, in traccar.xml, activate only those protocols I expect to use. Since I'm using just two device protocols, I comment out all the protocol declarations in default.xml (nodes containing key=*.port). I enable several filters to cut down on what I consider spurious or unhelpful locations making their way to the database. I disable the geocoder as I am not interested in address lookups. I added this to suppress warnings in MySQL server logs on Ubuntu 16.04. Note the useSSL=false parameter in database.url below.

default.xml (a set of defaults, overwritten during upgrades, imported and overridden in traccar.xml).

Traccar configuration files are in /opt/traccar/conf:

Install traccar web interface ubuntu